Tuesday 23 January 2018

Scenes from the January Working day

The restoration team had their first working day of 2018 on Saturday 21st January when the angles were riveted to the rear drag box plate.  The following pictures were taken during the process.  It must be stressed that the work could only take place with the co-operation of the works manager and his staff in providing access to the space and equipment.  This is much appreciated.



Ben and Cameron checking the gas lance at the start of the heating process
 
The process starting by heating the rivets

Georgie making sure the rivets are heated to the right temperature

The air powered riveting machine being used to make sure the results are consistent

Rueben and Matt setting up ready for the next rivet
All the angles riveted up and ready for the final machining of the side angles
The angles at the side of the plate will now need to be machined to form a tight joint between the angle and the plate.  This will be carried out in the loco works again with the co-operation of the team in the workshop.

Painting is continuing on the wheel sets and hopefully these will be turned out in Maunsell Green before too much longer.
 
The monthly "Official" working days will continue throughout the year with the next few dates being: February 10th, March 24th and April 14th. If you ar3e interested in helping with the physical work, or publicity and sales, please e mail us at the address below.
 
Thank you

Clive

Please remember that this work can only continue with the donations, support and interest that is forthcoming from all of our supporters. 
 
If you would like to help us to continue this work with a donation, please go to our BT MyDonate page
 
 
 or use the QR code below.
 
To contact us please E Mail us on thefenchurchfund@gmail.com
 
Thank you for your continued support and interest, it is much appreciated. With your help we should have a rolling chassis by the end of the near and hopefully a working loco in around 4 years.

No comments:

Post a Comment